Description
Synthetic high-pressure wear protection additive,
designed for use in modern gasoline and diesel
engines. A moldable and friction-reducing layer is
built up in the engine that remains effective for at
least 50,000 km. This leads in turn to an excellent
reduction in wear, longer engine service life, reduction
of fuel consumption and pollutants due to the lowfriction effect and an optimal engine performance
thanks to smooth running.
Properties
- reduces fuel consumption
- friction and wear reducing
- stable under extreme pressures
- increases smooth operation
- tested for particulate filters and catalytic
converters
- high thermal stability
- miscible with all commercially available motor oils
- long engine service life
Technical data
Base synthetic additives, base oils
Color / appearance green
Density at 20 °C 0,88 g/cm³
Viscosity at 40 °C 130 mm²/s
DIN 51398
Areas of application
For gasoline and diesel engines.
Not suitable for use on motorbikes with wet clutches.
Can be safely used in vehicles with toothed belt
running in oil.
Application
Molygen Motor Protect should be added approximately
every 50,000 km during oil changes. Contents of the
can sufficient for up to 5 liters of oil. Reduce the
specified oil volume by 500 ml. For economic reasons,
the addition should be made at or shortly after the oil
change. Molygen Motor Protect is compatible with all
commercially available mineral-based and syntheticbased motor oils.
Note:
Not suitable for use on motorbikes with wet clutches!