Motorbike Chain and Brake Cleaner
Description
Specially developed cleaner with selected solvent combinations for fast, easy cleaning and degreasing structural parts in the two-wheel sector.
Properties
- high proportion of active components
- absolutely free of chlorine
- optimum penetration capacity
- low surface tension
- dissolves resin and tar-type residues
- controlled evaporation free of residues
- leaves no residues
- optimizes economical use
- removes oil and grease-based contaminants
Areas of application
For cleaning chains with and without O/X-rings on two-wheeled vehic les and quads.
Application
Place a box or rag under the parts to be cleaned. Spray dirty chains withMotorbike Chain Cleaner and let it run off. After the solvents have evaporated, the chain will be clean and free of grease and ready to be coated with Motorbike Chain Lube or Chain Spray White. Do not spray onto plastics. Do not lay rubber components in a container with Cleaning Fluid to clean them as they may be attacked. Note Check parts which have been painted for compatibility by testing on a hidden area.
Motorbike Chain Lube white
Description
White, full synthetic special grease. For optimal lubrication through visible application on the chain. Cold, heat and spray resistant. Very good adhesion and wear protection. Reduces chain elongation and extends the service life of the chain. Good creeping properties and good corrosion protection. The 50 ml can can be refilled with the 400 ml can. We recommend cleaning the chain with Motorbike Chain and Brake Cleaner (Part No. 1602) before use.
Properties
- excellent penetration action
- especially cold, hot and splash-water resistant
- outstanding corrosion protection
- excellent adhesion
- friction and wear reducing
- resistant to acceleration forces
- highest load-carrying capacity
- reduces chain elongation
Areas of application
For all highly-stressed and high-speed motorcycle chains with and without O/X-rings.
Application
We recommend cleaning the chain with Motorbike Chain and Brake Cleaner (Part No. 1602) before use. Spray chain with Motorbike Chain Spray until white. The lubricant attains its final consistency and adherence once the solvent has evaporated.